Wide-range. High Quality Products
Please fill the inquiries form to send your questions related to our products and services.
For Fuel Oil DeliveryThis nozzle is offered to fill your requirements where dash pot construction is not necessary.However, the same rugged construction and long wear features of the nozzle have been built into this model.
Part No. 880-330-01
Size (Inches/Milimeters): 4.00/101.6Weight (Pounds/Kilograms): 6.06/2.75
Part No. 880-403-01
Part No. : 880-500-02
Flomax Fuel Nozzles connect to all standard fuel receivers. The FN600 fuel nozzle has latching dogs and the FNBL fuel nozzle uses a ball lock design. Both nozzles come with a ball bearing 1 ½” NPT swivel. An available plug is specially designed to seal out dirt and contaminants and is attached with a PVC coated ¼” wire lanyard. A patent pending removable piston assembly allows the cylinder to be easily removed for rebuilding. Nozzles can be performance adapted to specific user requirements.
FNBLDiesel Fuel NozzleNozzle Length: 11 inchesNozzle Weight: 6.6 lbsNozzle Swivel Thread: 1.5 NPT
Standard shutoff set at 8.0 PSI
(FloMAX nozzles can be set from 5.5 PSI shutoff to 13.00 PSI shutoff as required)Working pressure – 125 PSI
Burst pressure – 250 PSI
The BFN is rated at 625 PSI burst pressure and 300 PSI operating pressure.
The FloMAX Bulk Fuel Nozzle has been designed to transfer large volumes of fuel at high flow rate using existing standart 1 ½” fuel recievers. While best results will be obtained using a FloMAX FRA, FRS, or FR-RS fuel receiver, the BFN is completely compatible with all industry standard fuel receivers. The BFN has a push-to-connect design that releases from the receiver with a gentle pull on the pullback or the poly coated stainless steel lanyard. This is a dry break nozzle that uses the same poppet and vulcanized Viton seal valve sleeve as the FloMAX FN600 and FNBL fuel nozzles. The BFN is an excellent option when high fuel flow is required, but auto shutoff isn’t.
FRA Fuel Receiver (Aluminum)
FloMAX Fuel Receivers are designed with an enclosed stem spring that provides a smooth fuel flow path. This extends both the life of the receiver and the fuel nozzle. All FloMAX fuel receivers are compatible with the industry standard fuel nozzles. The FRA (aircraft grade anodized aluminum) fuel receiver and the FRS (nickel-plated steel) fuel receiver both have the redesigned internal poppet assembly. The spring is completely inside the poppet, removing the spring from the flow path, which increases fuel flow and reduces backpressure and vibration.
The FR-RS removable sleeve fuel receiver has an aircraft grade anodized aluminum body with a removable stainless steel wear sleeve. This revolutionary nozzle allows the fuel receiver wear surfaces to be replaced without removing the fuel receiver from the tank or the loss of any fuel. The single poppet design has the same reduced backpressure, reduced vibration, and increased flow rate as the FRA and FRS receivers.
The FloMAX Gravity Fill Receivers are made from anodized aircraft grade aluminum. They have a welded on cast aluminum handle for strength and convenience. The tube comes in 2 diameters, the standard 1-½ inch and the 1-inch for use in filling smaller opening fuel tanks. Both diameter sizes come in either straight, with a 45-degree bend, or with a 90-degree bend.
Flomax Swivels feature all metal construction and have a 37% greater flow than other industry standard swivels. They have a stainless steel male threaded base and a hard anodized 1 1/2″ female NPT nut. The swivels are sealed with two flourosilicone O-Rings for superior performance even in extreme temperature conditions. The nut and base swivel on 34 stainless steel ball bearings for smooth and consistent movement across all pressure ranges. Flomax swivels are available with various threaded bases including 1 ½” NPT, 2” NPT, and straight thread with an O-Ring seal for use with the FN600 and FNBL nozzles. Also available is the Inline double nut ball bearing swivel with a stainless steel center, and 1 ½” NPT female threaded nuts on both ends, and the 2″ NPT swivel.
Flomax Fuel Vents are manufactured using 100% metal components. A billet aircraft grade anodized aluminum cap provides superior impact strength as opposed to the less expensive and weaker plastic and cast aluminum caps on other vents. The float and sealing balls are housed in a ridged ball tube, not the flexible and easily damaged ball spring. This will ensure a positive seal that will not be damaged by vibration and movement. Flomax vents are available in all standard configurations including male or female threaded outlets, anti-vandalism sleeve, and half couplings. Stem tubes are available in standard 5”, 7”, 9” and 12” lengths as well as any customer specified length.
Flomax Nozzle and Receiver connectors are fully compatible and interchangeable with industry standard connectors. The caps, plugs, and connectors are 100% metal, manufactured using aircraft grade anodized aluminum and electroless nickel plated steel. The color-coded and labeled mating components provide for quick positive identification.
Connection : 1" NPT
Connection : 3/4" NPT
Connections : Male ¾" x Female 1"
Connections : Male 1" x Female 1"
Connections : Male 1"