Wide-range. High Quality Products
The PZ-Series sliding vane pumps are specifically designed for petroleum products and industrial solvents. Thisindustrial pump line is ideal for bulk pump loading and unloading, fuel oil delivery truck, and transport applications. Suitable liquids include petrochemicals, fuel oil, gasoline, biofuels, ethanol, solvents and many more. Unlike the CP- and CD-models, they do not come with a replaceable cam; however, you can replace the sideplates. They have an adjustable internal relief valve and fewer mechanical sealing options than our CP- and CD-model pumps. Available in 2” and 2.5” sizes.
CP-model sliding vane industrial pumps are designed for a maximum working pressure of 200 psi (13.8 bar). The sliding vane design has self-adjusting vanes that offers a consistent level of pumping efficiency throughout the life of the pump. They are constructed with a combination of gaskets and O-rings, have an adjustable internal relief valve, and a wide variety of mechanical sealing options. Ideal for petroleum products with low vapor pressures such as petroleum based oils, fuel oils and lube oils, and thin liquids such as alcohols and solvents. Available in 2”, 2.5”, 3” and 4” sizes.
FTI centrifugal pumps are constructed from rugged, corrosion resistant materials including heavy gauge stainless steel and plastics specifically engineered for maximum corrosion resistance. Pumps are available in either vertical or horizontal configurations, either mechanically sealed or magnetically coupled for sealless operation. Mag drive pumps feature high-powered, rare earth magnetic couplings which allow the transmission of maximum horsepower.
To view our centrifugal pump selections, simply click on the categories at left and browse through the various offerings, or use our online Centrifugal Pump Selector application. The selector automatically searches for the best matches based on hydraulic requirements and provides a list of choices for consideration.
Centrifugal Pumps Series
Drum And Barrel Pumps Series :
Variable Frequency Drive
M20 Power MonitorCentrifugal Pump Base Plates
Finish Thompson's deluxe M20 Power Monitor with digital display and PLC output provides outstanding protection against pump failure due to run dry, dead heading, excess power, de-coupling and lack of priming (SP Series).
The M20 operates at 50 or 60 Hz, is easy to install, and offers four levels of protection (pre-alarm minimum & maximum power; alarm minimum & maximum power). Just three models cover all motor voltages up to 690 VAC and a transducer is included with each M20 at no additional charge.
For selection assistance, please contact Finish Thompson. Please have the voltage the motor will operate at and, if not ordering a motor with the pump, please also provide the motor data (i.e. brand, single or 3-phase, HP, etc.).
Pedestal assemblies enable a pump to be coupled to special AC or DC electric motors, air motors, gas or diesel engines, and hydraulic motors using a flexible coupling. Finish Thompson offers standard pedestal assemblies to fit any of our horizontal centrifugal pumps with a NEMA 56C motor adapter.
A pedestal assembly option is also offered for the UC Series to fit NEMA frame sizes 145TC up to 256TC and IEC 90 up to 160.
Optional pedestal frame accessories, such as couplings, coupling guards, and base plates are available upon request.
Finish Thompson flow meters can dispense and batch precise amounts of fluids from drums, barrels, totes and other containers. Constructed of splash- and corrosion-resistant polypropylene or PVDF construction, flow meters can handle a wide variety of chemicals and corrosive liquids such as acids, bases, cleaners, coolants, plating solutions, pesticides and herbicides.
They are available as standard preset factory calibrated to provide flow rate and total volume pumped, with user calibration available for custom flow rates and totals available in select models. Batch control, available on FMBC models, stops the pump after a customer adjustable preset volume has been pumped.
With an easy to read LCD display, push-button interface, engineered connection components for fast assembly, and an automatic power down feature to extend the life of battery-operated models, FTI flow meters offer user friendly features for ease of pumping and dispensing.
Flow meters offers +/- 1% accuracy and repeatability when pumping fluids with viscosities up to 20 cP at temperatures ranging from 32Ë� F (0Ë� C) to 120Ë� F (49Ë� C) with flow ranging between 5 gpm (20 lpm) to 32 gpm (120 lpm). Meters are designed for use on PFM, PFP and PFV drum pumps. Please contact Finish Thompson for capabilities of specific models to ensure correct selection for your application.
Static Protection Kit
Finish Thompson’s Static Protection Kit (SPK) is recommended to help prevent the accumulation of static charge when transferring flammable or combustible liquids. It is to be used in conjunction with stainless steel drum pumps and air or explosion-proof electric motors.
When pumping flammables at high flow rates, a static charge can build up due to the high velocity at which the fluid is moving. Static charge can become a spark capable of igniting flammable liquids. This is rare occurrence, but it is wise to prevent the possibility by using the SPK. Keeping the velocity of the liquid low significantly reduces these hazards. Our metal tube pumps combined with an appropriate motor and static protection kit is an engineered package designed to provide customers with a high level of protection when pumping flammable liquids.
The SPK is a conductive, 4-foot long x 1-inch I.D. cross-linked polyethylene discharge hose with grounding cables to bond the pump, motor, hose and receiving drum. It will also limit the pumps output velocity to 3-feet/second maximum (about 7 gpm through a 1’’ hose), which will reduce the hazards of static build-up.
Flexible discharge tubing is used to safely transfer fluids from pump to container.
Discharge tubing is available in clear or reinforced PVC with operating temperatures ranging from -22˚ F (-30˚ C) to 175˚ F (79˚ C). Operating temperature is dependent upon material and applicable pump model.
Standard length is 5 ft., but tubing can also be purchased by the foot (4 ft. minimum is required).
Miscellaneous Drum Pump Accessories
Stainless Steel Hose Clamp - Secures discharge tubing around pump and fittings.
Drum Adapter - Keeps pump snug in container bung & limits escape of fumes. Fits standard 2" IPS bung opening.
Inlet Strainer - Prevents intake of objects or particulates.
Wall Mount Bracket - Stores pump upright on the wall.
Chargers - Charges S6 lithium ion motor in two hours.
Discharge Spout - Attach quick disconnect fittings, flow meters, or hard piping.
USA manufactured, Finish Thompson Solvent Recycling systems incorporate superior technology and design to recycle almost any solvent for reuse. This solvent recycling (distillation) equipment has a proven track record. Thousands of satisfied customers use these solvent recyclers to successfully recycle millions of gallons of waste solvent on site each year.
Finish Thompson was a pioneer in the design and technology development of on site solvent distillation. FTI's batch distillation systems achieved patent status and received certification from independent testing agencies. Nearly 30 years of manufacturing experience in this industry earned FTI an international reputation as an expert in the design, manufacture, and application of solvent distillation/solvent recycling technology. FTI solvent recyclers carry a 3-year warranty along with a lifetime warranty on the heater unit.
How It Works
LS Series Common Characteristics
BE SERIESFinish Thompson's BE-55C antifreeze recycling system utilizes advanced vacuum distillation technology to recycle waste engine coolant.
WHY USE VACUUM DISTILLATION TO RECYCLE WASTE ENGINE COOLANT?Simply put, FTI's patented distillation technology excels at removing all contaminants, both suspended and dissolved, from the waste coolant. It provides the highest quality, recycled coolant available and is the only process that removes water from the waste stream...resulting in a distillate (end product) of concentrated pure glycol.
This technology has been laboratory and fleet tested and is approved by numerous automotive and heavy duty OEMs. All recycling equipment is USA manufactured following ISO9001 guidelines for consistency in manufacturing procedures and commitment to promised delivery schedules.
Standart Features :
Specifications:Process time:16 to 18 hours
Dimensions:Height: 60" (152 cm)Width: 54" (137 cm)Depth: 32" (81 cm)
Electrical Requirements:240V, 3 phase, 50/60 Hz; 40 amps
Air Operated Double Diaphragm Pumps
Oil Pump Reference
Dura Flo, 12 : 1 Carbon Steel
Or Dura Flo, 12 : 1 Stainless Steel
Grease Pumps Quick Reference
Please fill the inquiries form to send your questions related to our products and services.
SERIES OF CYLINDERS :
THE DIFFERENCE IS THE STANDARD FEATURES :
SERIES OF HOSES OR ADAPTOR :
High-quality, industrial hydraulic jacks handle a wide range of construction, rigging, and other applications.
SERIES OF MAINTENANCE KITS :
Complete, pre-assembled kits especially designed to handle demanding maintenance tasks.
SERIES OF PUMPS :
Hydraulic spreaders deliver up to one-ton rated load from the beginning of stroke.
SERIES OF VALVES :
(-20 to 350 F)
1 to 5,500 cSt
Used for acetone, Ethanol, methanol, anhydrous ammonia, anti-freeze, benzene, boric acid, detergents, diesel fuel, ethylene glycol, fuel oils, glycerin, kerosene, lacquers, toluene, turpentine and urea (DEF).Fits 15-55 gallon drumsDispenses 1 gallon per 8 liftsNylon construction with Teflon seals and stainless steel rodComes with 2" bung adaptor
Warning: Do not use Fluids with a ash point below 100°C (38°C), such as Gasoline & Alcohol. Sparking could result in explosion causing fatal inquiry.
Cast aluminum Fill-Rite pump provides smooth, continuous transfer of medium viscosity liquids, as well as oil, gasoline and diesel fuel. Improved seal keeps water out. Built-in check valve and strainer. Pump easily mounts to a standard drum with 2in. NPT. Anti-siphoning device, hose with static wire and a 20 in. to 34 3/4 in. telescoping suction pipe. Padlockable pump can be set up for reverse flow and is adaptable for drums, kegs or storage tanks. U.S.A.
High Flow AC Utility Rotary Vane Pumps. With a flow rate few pumps can match. the FR311VLB has an open flow rate of 30 GPM. This pump provides long life. Explosion-proof UL listed dual voltage 3/4 HP motor (115 and 230 VAC). Motor has sealed bearings, heavy-duty switch and thermal overload protection Built-in junction box Cast iron pump housing with iron rotor and carbon vanes Check valve, pressure relief valve and strainer assembly, Automatic bypass valve, 2 in. threaded bung for tank openings. Includes 901L Meter, 18 ft. hose and 1 in. Automatic Ultra High Flow Nozzle and 2-Year Warranty.
This rugged, positive displacement, Heavy Duty pump is UL listed. Explosion proof UL listed 1/3 HP motor (115 VAC-60Hz) with sealed bearings, Heavy Duty switch, thermal overload protection and junction box. Carbon vanes and ceramic/carbon seals reduce wear and repair expense. Integral check valve with pressure relief on outlet side reduces pressure drop and improves vertical lift. Easy removable strainer, automatic bypass valve, 2 in. threaded bung for tank openings.
This industry standard DC pump dispenses up to 15 GPM (57 GPM). The FR1211GL is ideal for pumping gas, diesel fuel and kerosene. With an amp draw that's easy on your DC power source. Explosion-proof UL/cUL listed 1/4 HP motor. The FR1211GL comes complete with and 807CL meter, 12 ft. static wire hose and manual nozzle.
This industry standard DC pump dispenses up to 57 GPM. The FR2411GL is ideal for pumping gas, diesel fuel and kerosene. With an amp draw that's easy on your DC power source. Explosion-proof 1/4 HP motor. The FR2411GL comes complete with a 807CL Mechanical Meter, 12 in. static wire hose and manual nozzle.
The Fill-Rite diesel fuel transfer pump delivers diesel fuel or antifreeze. Not to be used for dispensing gasoline, alcohol, or waste vegetable oil to be used for Biodiesel fuel.
This series of Ranger Pumps is designed to operated at reduced motor speeds. This allows the pump to operate equally well for both design and low viscocity liquids.
This seies of Ranger pumps are designed to output 11 Gallons per revolution at a maximum of 750 rpm and generate up to 80 gallons per minute. These pumps are offered in 90° , 2" NPT tapped port model and a 180º model with 2" flanges.
This series of Ranger Pumps are designed to output 17 gallons per revolution at a maximum of 750 rpm and generated up to 126 gallons per minute in a 90° model with 2" or 2.5" flanges and in a 90° model with 2" NPT tapped ports.
This series of Ranger Pumps are designed to output 22 gallons per revolution at a maximum of 750 rpm and generate up to 165 gallons per minute. These pumps are offered in 90° and 180° with 3" and 4" flanges.
This series of Ranger Pumps are designed to output 52 gallons per revolution at a maximum of 900 rpm and generate up to 460 gallons per minute. These pumps are offered in a 90° model with 3" and 4" flanges.
Ranger now offers the 11 series with 180° ports and 2" NPT flanges. This is a good choice when your plumbing does not accomodate the 90° port model. It is available with the standart RV, Double RV and plain endplate. It is also available with the HB, HH and GB models.
Ranger now offers a double relief valve for our series 11, 17 and 22 that will provide protection in both shaft rotations. The double relief will continue potect from overpressure even when the shaft rotation is changed and the pumps flow is reversed. The double relief is field adjustable and works similiar to the standard RV
Ranger now offers an integrated gear reduction unit for the 48 series. It is available in a 4.26:1, 4.88:1 and 5.66:1 ratio. Please refer to page 7 for additional information.
Blackmer S-Series pump is a rotary positive displacement pump.
We have two categories :
- Twin Screw Pump
- Triple Screw Pump
The innovatives seal-less and leak-free design of E Series pumps makes them ideal for handling hazardous chemicals, expensive fluids and hard to seal crystallizing, thermosetting or viscous fluids in continuous-process applications that may require 24/7 operation.
E Series Pumps excel in the handling of :
G Series pumps are excellent for transffering fluids with a wide range of viscosities where consistent, non-pulsating flow rate is required. With only two moving parts, the pump operates equally well in both clockwise and counterclockwise directions.
The G Series pump is also offered with multiple internal clearance options and single-point end-clearance adjustment to maximize efficiency and pump life based on your application's viscosity, temperature and fluid characteristics.